ESD Products - Bench & Floor Mats, Clean Room Products, ESD Chemicals, Benchtop Ionizers, Wrist Straps, Heel Grounders, Tapes
ESD Conductive Wax |

Comfort Cushion ESD Bench Covering

ESD  Table Top Covering  for Static Control

Comfort Cushion ESD Bench Covering

  • Excellent mechanical and electrical performance. 
  • Permanently Conductive 
  • Easy to clean
  • Static dissipative top layer.
  • Conductive scrim center layer.
  • Skid resistant, durable vinyl bottom layer. .
  • Meets or exceeds: EIA 625, MIL-HDBK-263 and MIL-STD-1686 
  • Available in 1/8" & 3/8" (multiple lengths)
  • Custom cuts available
This popular 3 layer advanced fusion vinyl / foam / vinyl bench top covering features excellent cushioning properties combined with aggressive static decay rates. The top layer is a wear resistant, easy to clean static dissipative Vinyl having sufficiently low resistance to discharge static-laden conductors, while preventing the shorting of pins on the backs of printed circuit boards laid on the mat. The middle layer is a highly conductive foam scrim providing the padding and the aggressive static decay while the bottom layer is a smooth yet slip resistant vinyl surface.

ELECTRICAL PROPERTIES for .125:
RTG: 1.1 x 10 E 06 to 5.5 X 10 E 07 @ 10 Volts,  EOS / ESD 4.1
RTG: 3.3 X 10 E 06 to 6.8 X 10 E 07 @ 10 Volts, EOS / ESD 4.1

ELECTRICAL PROPERTIES for .375:
RTG: 1.1 x 10 E 07 to 5.5 X 10 E 08 @ 10 Volts, EOS / ESD 4.1
RTT: 1.3 X 10 E 07 to 6.8 X 10 E 08 @ 10 Volts, EOS / ESD 4.1

CHARGE DECAY:
Conditioning: 50% RH +/- 2% @ 23C +/- 1C for 24 Hours.
Test conducted @: 50% RH +/- 2% @ 23C +/- 1C.
Test results = Time, seconds to decay to 10% of initial charge.
Results: <1.5 seconds

PHYSICAL PROPERTIES:  Thickness, .125 and .375

Roll Lengths for .125 thick material:  24” x 50’  /  24” x 100’  /  30”x 100’  /  36” x 50  /  36” x 100’  / 48” x 50’  / 48” X 100’ Custom Cuts Available

Roll Lengths for .375 thick material: 30” x 60’ / 36” x 60’ / also available in 12 ea 18” x 23” stocked precuts, Custom Cuts Available.

 

Comfort Cushion 3 Layer ESD Conductive Bench Top Covering

PN: BMUC- (T" x L x W") Blue or Grey, .125 & .375 thick, Blue or Grey, Rolls and Precuts

<--Back to Main Bench Matting Page

Copyright  StopESD, Inc | Questions/Comments About this Site??