Static Control/ ESD Ionizers

Ion 6432e Local Area Ionizing Blower

Local Area Benchtop Blower

Item #
Item Price Enter Quantity
S-ION-6432-E
$406.32
Share/Save/Bookmark

The Ion-6432/6432e Local Area Ionizing Blower controls static discharge in assembly, inspection, packaging areas, and intool wherever static build-up can cause contamination, ESD, material-handling problems or microprocessor lock-up.

Patented IsoStat technology makes the Ion-6432/6432e the most reliable ionizers available. IsoStat characteristics include small size and operation without grounding wires or cables while still maintaining ionizer balance. The Ion 85's internal emitter points are electrostatically shielded to eliminate field-induced charging. Steady-state DC ion emission to provide fast discharge with low airflow for greater operator comfort, the Ion-6432's blower offers the best of IsoStat technology.

Enhanced Features

In addition to the standard features on the Ion 85, the enhanced Ion 85e offers an alarm LED on the front of the blower that indicates a high voltage circuitry failure and a five pin facility monitoring system (FMS) interface. The FMS interface provides a 4-20 mA current loop and relay output connection. Together with the 24 VDC input connection, the FMS output is situated on a convenient terminal block, designed for easy integration with your process equipment.

Patented IsoStat Technology

The ION 75's patented IsoStat technology guarantees intrinsically balanced ionization and eliminates complicated feedback circuits. Ionizers incorporating this technology never need calibration and require very little maintenance. IsoStat is based on a law of physics, Conservation of Charge, which states that charge cannot be created or destroyed in an isolated system. By isolating the ionizer’s emitter points from ground, IsoStat ensures equal numbers of positive and negative ions to better protect sensitive products.

Power Options

Power Options

For increased flexibility, the Ion 85e can be directly powered by process equipment or 24 VDC/VAC power to fit the needs of your environment. Two transformers are available: 120 VAC/60 Hz (transformer 14-1320) or 230VAC/50 Hz (transformer 14-1330).


FEATURES:

BENEFITS:

SPECIFICATIONS:

Input 24 VDC (±10%), 6 watts max.or
24 VAC (±10%), 50-60 Hz, 6 watts max.
Power Indicator Green power LED; red alarm LED available on Model Ion 85e
Ion Emission Steady-state DC
Emitter Points Tungsten wire; internally shielded;
Airflow 49 CFM, typical
Ozone <0.005 ppm (24-hour accumulation)
Mounting Small in-tool bracket/stand (1.8 x 5.1 in./45 x 129 mm); large benchtop stand (4.1 x 5.1 in./ 108 x 129 mm); both with 1/4” mounting hole and 10-32 truss head screws
Dimensions 5.3H x 5.0W x 2.5D inches (133 x 127 x 63 mm);
small bracket base is 1.8” (45 mm); large stand base is 4.1” (108 mm).
Weight 21 oz (595g) with large stand
Warranty 2-year limited warranty
Certifications CE (pending), GS
Ion 320 Wall Transformer
Input Voltage 120 VAC ±10%, 60 Hz
Output 24 VAC @450 mA
Certifications UL
Ion 330 Wall Transformer
Input Voltage 230 VAC, 50 Hz
Output 24 VAC @750 mA, ±5%
Dimensions 2.8H x 2.5W x 1.9D in. (71H x 64W x 48D mm)
Certifications CE
Ion 322 Wall Transformer
Input Voltage 90-264 VAC, 50 Hz
Output 24 VAC @ 417 mA
Dimensions 1.4H x 2.1W x 3.4L in. (36H x 53W x 86L mm)
Certifications ULCE

Technical Documents:

» ION 85 Data Sheet


ESD Mats

Homogenous ESD Matting

We now Sell ESD Tapes!
DuroStat Elite - Homogenous Vinyl ESD Matting


Buy Copper Grounding Tape Now!!

Best Sellers

Economy Conductive Rubber Heel Grounder

Conductive Rubber Heel Grounder
Static Protection for $2.50


Buy Heel Grounder Now!!

Stop ESD provides affordable grounding solutions for electronics manufacturing and assembly areas


StopESD: Direct: 719-676-2548 | Fax: 719-676-2549

© 2009 StopESD.com