Spacer Image
Home
Ordering Help Site Map  
ESD Products - Bench & Floor Mats, Clean Room Products, ESD Chemicals, Benchtop Ionizers, Wrist Straps, Heel Grounders, TapesBench & Floor MatsClean Room ProductsESD Wax & ChemicalsGround CordsIonizersESD Monitors & TestersOffice ProductsWrist & Heel StrapsTape & LabelsTechnical DocumentsContactContact SalesContact Tech SupportHow To Order
Spacer Image

Constant ESD Monitors

ESD Wrist Strap Monitors / Heel Strap Monitors

Constant, Dependable, Economical

Reliable, constant esd ground monitoring at the ESD workstation is critical. Unlike static control monitors that require expensive, fragile, dual conductor wrist strap cords (and provide a pulsed verification a mere 10% of the time) our monitors provide 100% continuous readings and do not require special wrist straps.  Per ANSI/ESD S.2020; "Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into an ESD Program Plan." 

  • 100% continuous monitoring.
  • Works with standard wrist straps.
  • Calibration via NIST certified instruments.
  • Advanced; newest vector impedance technology.
  • Easy-to-comprehend visual and audio alarms.
  • AC Powered, available in 110 or 230 Volt.
  • Quality Design and Manufacturing.
  • Designed to last a lifetime.
  • Made in America!
    Note: We manufacture custom cut table top mats that work GREAT with 9202 & 9203 constant esd monitors.  If you're manufacturing your own, our Comfort Cushion and our UltraCon TM are PERFECT choices!
Testing and logging wrist straps and table top material with non-constant test equipment often becomes a cumbersome paperwork nightmare. Use of our continuous monitors continuously verifies the effectiveness of you ESD protected workstation and simultaneously satisfies ISO logging requirements. Designed to reduce cumbersome logging, save money and fit the requirements of the most stringent of ESD Programs, our dependable ESD monitors provide verification of a single wrist strap (model 9201), a single wrist strap AND ESD conductive table top mat (model 9202) or DUAL wrist straps AND a  ESD conductive table top mat.

CM-9201, Single Wrist Strap Monitor

Single Wrist Strap Monitor
Wrist Strap Monitor

  • Size: .88" x 1.750" x 1.250"
  • Mounting: Screw On
  • Safe Condition: 1.2 Meg Ohm, +/-5%
  • Fault Condition: 7.2 Meg Ohm,+/-5%
  • Power: 110v (standard), 230 v (optional) Power Pack
  • Visual Alarm: Dual LED, green (safe), red (fault).
  • Audio Alarm: Piezo buzzer.
  • Operation: Active when operator plugs in.

  • Size: 1" x 2.4" x 2.3"
  • Mounting: Velcro or optional bracket.
  • Safe Condition: 1.2 Meg Ohm,+/-2%
  • Fault Condition: 7.2 Meg Ohm,+/-5%
  • Power: (standard) 115 v Power Pack
  • Power: (optional) 230 v Power Pack
  • Visual Alarm: Dual LED, green (safe), red (fault).
  • Audio Alarm: Piezo buzzer.
  • Operation: Active when operator plugs in.
Note: We manufacture custom cut table top mats that work GREAT with 9202 & 9203 monitors.  If you're manufacturing your own, our Comfort Cushion and our UltraCon TM are PERFECT choices!

CM-9202, Single Wrist Strap and Table Top Constant Monitor

Single Wrist Strap

Top Constant Monitor


CM-9203, Dual Wrist Straps & Work Surface Monitor

Dual Wrist Straps
Surface Monitor
  • Size: 1" x 4" x 2.400"
  • Mounting: Velcro or optional bracket.
  • Safe Condition: 1.2 Meg Ohm,+/-2%
  • Fault Condition: 7.2 Meg Ohm,+/-5%
  • Power: 110v (standard), 230 v (optional) Power Pack
  • Visual Alarm: Dual LED, green (safe), red (fault).
  • Audio Alarm: Piezo buzzer.
  • Operation: Active when operator plugs in.

Technical Documents:
» CM-9201-Data Sheet
» CM-9202-Data Sheet
» CM-9203-Data Sheet

Ordering:

Description Part Number
Price
Weight

Single Wrist Strap Monitor

S-CM 9201
$50.00
1 lbs.
Single Wrist Strap and Table Top Constant Monitor
S-CM 9202
$71.00
1 lbs.
Dual Wrist Straps &
Work Surface Monitor
S-CM 9203
$118.00
2 lbs.

Special Discounts on Bulk Orders:

Item Number
1-24
25-49 (5%)
50-99 (10%)
100-499 (15%)

S-CM 9201

$50.00
$47.50
$45.00
$ 42.50

S-CM 9202

$71.00
$67.45
$63.90
$60.35

S-CM 9203

$118.00
$112.10
$106.20
$100.30

Item # Select Quantity
(1-24)
S-CM 9201
S-CM 9202
S-CM 9203

 If verification of original factory calibration is desirable we are now offering our new verification test box as follows:

  • CM-9201-TM test box: $68.00
  • CM-9202-TM test box: $68.00
  • CM-9203-TM test box: $101.00
Annual recertification to NIST Standards: $50.00
Copyright © StopESD, Inc | Questions/Comments About this Site??